- July 2018
- January 2018
- November 2017
- August 2017
- December 2016
- August 2016
- July 2016
- June 2016
- May 2016
- March 2016
- January 2016
- December 2015
- November 2015
- October 2015
- September 2015
- August 2015
- July 2015
- June 2015
- May 2015
- April 2015
- March 2015
- February 2015
- December 2014
- November 2014
- October 2014
- September 2014
- August 2014
- July 2014
- June 2014
- May 2014
- April 2014
- March 2014
- February 2014
- December 2013
- November 2013
- September 2013
- August 2013
- July 2013
- June 2013
- May 2013
- March 2013
- February 2013
- January 2013
- December 2012
- October 2012
- September 2012
- July 2012
- June 2012
- May 2012
- April 2012
- March 2012
- February 2012
- January 2012
- December 2011
- November 2011
- October 2011
- September 2011
- August 2011
- July 2011
- June 2011
- May 2011
- April 2011
- March 2011
- February 2011
- January 2011
- December 2010
- November 2010
- October 2010
- September 2010
- August 2010
- July 2010
- June 2010
- May 2010
- March 2010
- February 2010
- January 2010
- December 2009
- November 2009
- October 2009
- September 2009
- August 2009
- July 2009
- June 2009
- May 2009
- April 2009
- March 2009
- February 2009
- January 2009
- December 2008
Tag Archives: Dyson Doctor
So you want to buy a Dyson Airblade filter?
At last you can buy a Dyson Airblade filter online.
The difference is that you can buy these without serial numbers, registration, or anyone trying to up-sell you into a new hand dryer.
Better still, you don’t have to call anyone begging for them as you did before with Dyson. You can buy them painlessly online and get one or more delivered anywhere in the world.
Oh, you want to know where from?
This is from a Dyson dealer in a member-only forum in the Dyson trade business:
I think the window of opportunity for large scale refurbing of machines is coming to an end. I’ll explain why I think that and we’ll maybe discuss.
When James Dyson had the reigns of the company instead of Max Conze and the bean counters as we have now, they made good products that lasted. Great for consumers and folks like us who refurb stuff, but bad for the long term growth of Dyson.
I call it the Volvo effect: Remember the Volvo 240, the 740 and the 940? Proper things; albeit facelifted versions of the same things. Built like tanks, cheap and easy to fix and lasted for years. Those cars were so good that Volvo went skint and started rebadging French cars along the way down to ownership by Ford, etc. Because repeat custom was low as the product was too good.
Why would you sell someone a product and not see that buyer again for fifteen years, when you could sell them a product that has built in natural short term expiry, beyond which it is an uneconomical repair? That way you see the customer again right after the guarantee runs out.
In reality, Dyson was a one trick Pony. The DC01 was OK, but the DC04 was really the one that made the company. But, for example, my Dad still has one of the very first DC04’s we imported brand new in the late 90’s. As do literally hundreds of thousands of other people.
The DC07, a DC04 with a different cyclone. A facelift.
The DC14, a revamped DC04.
The DC27 has a carriage design fault that nobody seems to be able to figure out how to fix.
The DC33, a shoddier, cheaper built, facelifted DC14. Pretty much a DC04 under the skin.
And at the DC33, they killed the model that made the company. That design is now dead. It was still too good.
Along the way we had the over-complicated and expensive to repair DC15 and DC18. The future!
What we have since is facelifts and evolution of the DC18. Each one more complicated, with more to go wrong, and inbuilt design flaws and intended short life components.
Balls are built to blow up or fall to bits at the end of the guarantee period. Many do so well before then. Early expiry by design.
If they learn by the mistakes of making the parts and tools fit all models, which they have, they can minimise the impact of the aftermarket on parts prices by making everything that little bit different along the way so parts are not interchangeable (DC18 and DC25 cyclones are early evidence of this – same item, bar one tweak which stops one working on the other).
Fast forward to today, and we have the DC41, discussed here. A machine so overly complicated to take apart, with parts so expensive, and design so awful that core units will be in no condition to refurbish in the future. Even the ducts were falling apart on the “clean ones” we got. We had to glue them up and make some pretty shoddy chemical metal repairs here and there I wasn’t really happy with. They have the inbuilt design fault that renders most in need of a new cleaner head (shitty wheel causing glueing to the floor and Johnson brushroll motor from the DC25).
DC41’s we here will see in two or three years will be in no condition to refurbish without practically renewing the machine. Who does hand-helds? Also crap and no small parts available for.
This means our window of opportunity has expired on new models. Dyson have closed the door (as they have tried to do on Airblades – but thats another story)
This leaves the refurbers window of opportunity the DC04, DC07, DC14 and DC33. To a lesser extent we might add the DC24 and DC25 (both riddled with design faults but just doable).
We are seeing some DC04 stuff going obsolete the last few weeks, soon they will pull support as they did with the DC01. Why the DC01 is almost gone.
We will be left with the 7, 14 and 33 as easy to do machines with plentiful parts. Followed up by the 24 and 25. When they get older? Job done.
Aggressive “trade in” deals is causing over supply in the core machine market. We was reaching out for machines a year ago. This week we turned down 120, and that is after moving along about a hundred into the trade recently “as is”. That wont last long, just long enough to pull a few hundred thousand more older machines out of the market to overwhelm the aftermarket and create export to the developing world, which is already happening – we already exported some machines this way.
Export en masse of core units is good for a manufacturer – it empties the main marketplace (where the profit is) of old products people can recycle. When did you last see a Volvo 940 or a Mercedes 307D/308D/310D T1 van?
You didnt because they all quietly vanished on boats to Africa. Volvo and Mercedes created export demand – as Dyson are doing. Soon we will see guys buying up old units to send to Africa, India and maybe Russia in container loads (remember when all the Ladas went back to Russia in 97-98?).
I give it five years tops. After which all that will be available is smashed up DC41’s and later models that will be uneconomical and over-complicated to repair leaving no decent profit margin. So the refurbed machine market will die. We’ll all get a good run on DC14’s (aka Volvo 940) now for a while, but when they start to look old hat, the easy days will be behind us.
This has all been planned by Dyson carefully to kill the refurbed machine aftermarket (an unintended consequence of a quality product), and by extension reign in the burgeoning after-market. Every machine any of us sell is a potential lost sale to them how they see it. I don’t agree with that (I think the customers are quite different), but I heard it from the horses mouth: A Dyson staff member. Why they closed our spares account without warning. Explanation? “We don’t support what you do. We don’t support the refurbished product market. We refuse to supply you, and have notified every dealer in Europe not to supply you.” Well, I like to ruffle feathers. I am flattered they noticed us.
Any thoughts or opinions out there? Continue reading
ManchesterVacs.com and DysonParts.com are giving away one of their reconditioned Dyson DC24’s! If you are a social media user: Twitter, Facebook, Pinintrest or Google+, you can easily enter this contest to win a FREE Dyson DC24 which will be delivered … Continue reading
Manchester, England (PRWEB) May 11, 2013
The specialist Dyson vacuum cleaner spare parts specialists http://manchestervacs.co.uk have re-launched their online spare parts store.
Already the largest independent retail Dyson spare parts suppliers in the north of England, Manchester Vacs have now extended their product ranges even further. The spares listings now cover every upright model Dyson have produced from the DC01 right up to the DC50, whilst adding spares also for non-UK cylinder models such as the DC29.
The range of Dyson spare parts now supplied by Manchester Vacs far exceed what Dyson themselves make available to the public, and they also offer many spare parts that Dyson refuse to make available even to the trade. You can buy the DC25 brushroll motors from Manchester Vacs that no other UK Dyson spare parts supplier is able to source.
Manchester Vacs continues to innovate and has once more turned the Dyson spares market on its head.
Recycled Dyson spare parts have always been a large part of the Manchester Vacs business model. Despite getting larger over the years, that hasn’t changed. The new online store still features many recycled and reconditioned parts. Customer feedback suggested that people enjoy not only saving money, but also being green at the same time. Recycled parts are a great way to do that. It is claimed that each of us throws away over three tonnes of broken electrical appliances during the course of our lives. Repairing and extending the life of your Dyson is green. It’s a small cog in the large machine that is our future sustainability.
The online store has now opened its doors to the world market making it easier for customers in Australia, the USA and elsewhere to source hard-to-find Dyson spare parts right from the home of Dyson: England. Manchester Vacs will also ship to some countries that many parts suppliers refuse to trade with such as Russia and Ukraine.
“Manchester Vacs supplies Dyson parts that are simply not available anywhere else. They were the first to sell brushroll removal tools in the UK, and they are the first to sell DC25 Johnson brushroll motors and PCB’s. They continue to innovate and turn the Dyson spares market on its head.” wrote Angus Black, the author of the ‘Unofficial Dyson DC07 Workshop Manual’ and spokesperson for http://dysonmedic.com – the oldest Dyson review site on the internet.
Manchester Vacs also give their site visitors and customers access to a global internet advice forum for Dyson enthusiasts and repairers. Its many hundreds of active members, expert advisors and experienced contributors from the US, Australia, Canada, South Africa and the UK, can advise the DIY repairer free of charge.
The new online Dyson spare parts shop at Manchester Vacs gives customers access to a highly innovative predictive search feature allowing them to find the parts they need with ease. Delivery is free on all UK orders over £25. They have also slashed three hundred prices across the store and now stand as one of the most competitive Dyson spare parts specialists on the internet.
The all new Manchester Vacs Dyson spare parts online shop is now open for business athttp://manchestervacs.co.uk/Dyson Continue reading
Why do we say to you that cold-calling telephone sales people who want to service your Dyson are a scam?
Well, first of all – they are NOT from Dyson!
When you have the “fly-by-night” cowboys in your home to do a twenty minute Dyson DC07 service, they will not do a proper job.
“Why not?” you may ask. Well, the reason is, that with a Dyson DC07, a professional service involves stripping the cyclone down and cleaning it – preferably with a power washer or a steam cleaner – to restore optimal performance.
You may not know this, because if you have read your Dyson instruction manual you won’t know what needs to be done. If you have read your Dyson DC07 Workshop Manual you will know what needs to be done.
I stripped a Dyson DC07 down a few days ago and it was blocked up in such a way that no “at home” service would be able to fix it. Look at this photo when I took off the cyclone top:
I spent thirty minutes cleaning and power-washing it so it looked like this:
Which is what it is supposed to look like if you expect it to work.
Today, I was reading over the old Dyson Medic site that was written a few years ago, and I was surprised that amongst the motor swap, belt change and filter service guides we wrote back then, that we didn’t discuss cyclone cleaning more.
It was covered very comprehensively in the Dyson DC07 Repair Manual, but not everyone has one of those. Some guys only like “free” download stuff and don’t want to pay for anything. Similarly, we at Dyson Medic sometimes hold a little something back that we will give you in one of our written books.
As Dyson Medic is one of the biggest and most-trusted after-market Dyson brands in the world, we hope you’ll buy something off us one day. If only to learn a few ‘trade secrets’ that we wont publish on our websites. 🙂
Anyway, the point of this short article was to implore you not to skimp on a Dyson DC07 service. Do NOT employ people who ‘do it in your home’ as they won’t have the facilities to clean your cyclone properly. Look at the photographs again – those cyclones block up and need cleaning properly!
A warning: Never accept anyone coming to your home to service or repair your Dyson who cold calls you. That is always a scam company who will rip you off!
Read about the Dyson scammers who ‘service in your home’ on the Dyson forums here: Dyson ‘special offer’ telephone calls are a scam. Continue reading
Manchester Vacs was founded as a Dyson spare parts and service specialist based in Manchester. Since that time, they have grown to be one of the North West’s largest independent and trusted service professionals for Dyson vacuum cleaners.
With over 30 years experience in the vacuum cleaner industry, Manchester Vacs has become renowned for excellent service. They pride themselves on providing good value to their ever-expanding customer base.
Their website offers much free information on DIY repairs to Dyson vacuum cleaners. With their wealth of Dyson knowledge, and their fast, friendly service, makes Manchester Vacs your one stop Dyson shop for Manchester, Stockport, Salford, Cheshire, Oldham, Lancashire and Tameside. If you are looking for a Dyson service in Manchester, look no further than Manchester Vacs.
Manchester Vacs is the original Manchester Vacs – click the red button below to visit the website.
Beware Unscrupulous Dyson Service Companies!
Such is their success in the Manchester area in recent years, that a few other individuals have set up copycat sites using similar themes, logos and fonts. These unscrupulous operators usually plagiarise the Manchester Vacs website for their material – which is illegal – and Manchester Vacs have been successful in having several copycat websites closed down to date.
Unfortunately, rogue Dyson ‘service’ companies are abundant in Manchester and Tameside. Most of the rogue Dyson service companies operate without commercial premises and prefer to ply their trade in your home. This way, they can take your machine to pieces and try to sting you for sometimes as much as £100 for a simple repair that would cost maybe a fifth of that with a reputable Dyson repairer.
Dyson have been made aware of more than 25 bogus companies and has been contacting customers personally to warn them of the scams. Trading standards have investigated several dubious Dyson service and repair companies in the Manchester area masquerading as legitimate operations. Most operate amateur built websites that are full of stolen images, Dyson’s trademark and one site we know of have even stolen Dyson’s official videos and overlaid them with their own text in order to dupe customers on Google into thinking that they may be in some way official Dyson agents.
If you seek service or repair for your Dyson in the Manchester or Tameside area, choose a trusted professional that have a bricks and mortar shop and and a good local reputation. Choose Manchester Vacs. Continue reading
As a member of the Dyson Forums, we just wanted to take an opportunity to bring you up to date with a few happenings, a few special offers and a handful of other things that may be of interest to you.
Although the forums were only recently added to our site, they have already drawn 225 members in a short space of time. We want to develop our forums into a vibrant and friendly online community that is both an excellent information resource and a place to chat about everything Dyson. We would like to see people from the public and the trade participating. Those in the trade who do not seek to directly compete with us (repair shops not in the North West of England for example) are welcome to a signature link and an entry in our “Worldwide Dyson Resources” section.
With a view to increasing particpation on the forums, today we opened a discussion about a periodical forum competition. Everybody likes something for nothing right? Read the topic and give us your opinions here: Any Interest in a Forum Competition?
We know a lot of guys read the forum here who are in the Dyson business. You might be market traders, car-booters or have a small Dyson specialist shop elsewhere in the UK or overseas. We have decided to try to cut some deals with smaller traders. You can read the topic here: Dyson Parts Trade Deals Available.
Have you seen the Dyson Airblade hand dryers? The ones that are typically around £1000 to buy? We made a deal on some recently and they have been selling well. We only have two left. If you are interested in one, take a look at the topic here: Dyson Airblade AB03 Silver Hand Dryers in Stock – £599
If you are in need of a Henry-type vacuum cleaner, we have been running a special offer for a few months on some commercial specification “Quickclean” machines. We are down to our last few now, and we probably wont bother buying any more as the suppliers recently put the price up. The stock we have, we bought last year before the VAT went up, and before the price increase, so our price of just £99 including DHL delivery will not be repeated. If you want to read more about them, take a look here: Special Offer: Brand New Commercial Tub Vacuums – Better Than a Henry.
Do you have a favourite Dyson? Did you vote in our poll? Here is the link: Poll — Which is your favourite Dyson? Vote Now! Up to now, the DC07 is in the lead with 36% of votes. If you havent voted already, we want your vote!
Our member Russ is asking about DC05 extension poles and stripping them down. Do you know about this? If so, why not reply his topic here: DC05 Extension Pole….again
Do you know anything about Dyson washing machines? Why not join in the discussion here: Dyson washing machine.
Are you a DC07 expert? Here is a topic for you: DC07 cleaner head pivot problem. Our member Laturb has got no replies on that topic yet. Why not help him out if you can?
And last but not least, we work quite hard to make sure people can find us on Google. But we like to know how you found us originally. Was it a link from another site? Was it from Google? Was it from an email or a recommendation? Tell us. Here is the topic: New Members – How did you find us?
Thanks for reading. You are receiving this newsletter as a member of the Dyson Forums. Don’t worry, you wont be getting three a week; nor will your details be passed to any other organisation or entity. But, we would love to see you as an active partcipant on our forums. Why not drop by and say hello?
The Dyson Discussion Board Team.
http://manchestervacs.co.uk/DysonForum/index.php Continue reading
If you are looking to buy a Dyson DC27 motor online in the UK and have landed here, we can help. As the DC27 is quite a late model of Dyson vacuum cleaner, not very many people are offering these DC27 motors to the public just yet.
It seems, to the independent Dyson specialists though, that the Dyson DC27’s are designed in such a way, as were the earlier DC14’s, that makes the motors work quite hard. If they are not looked after, for example by not washing or washing the filters when required, this puts undue stress on the motor and can cause premature failure. That means you will need to replace your motor as they are seldom repairable.
The Dyson DC27 is fitted with what is called a YDK motor (which some people call a YV type motor as they usually have “YV” followed by some numbers written on the side of them).
So here at the Real Deal Blog, we are going to let you into a little secret known only to the trade. The Dyson DC27 shares a motor with another model of Dyson. This means that you can buy them after-market right now (because Dyson will not sell you one) and you are not tied to a “Dyson service” at seventy-something quid to get your DC27 fixed.
If you are up to the job of replacing the motor yourself, you can get the motor for £35 including UK delivery to your door! Continue reading
The Dyson DC14 Crevice Tool: On early Dysons, the long crevice tool was pretty much the same and mostly interchangeable between models. Then Dyson had a natty idea; make each one for each machine different!
Why would they go to the trouble of doing that? Well, because the world and his wife were already making after-market Dyson crevice tools for the existing models. To make a new one for the DC14 means that for all those thousands and thousands of people who lose theirs, and all the Dyson reconditioning guys out there who like to sell a machine with tools, all those folks were tied to buying a Dyson one. Brilliant! Capitalism in action.
When one of the many after-market companies out there spend a lot of money to make a similar item for less money, Dyson are rumoured to come down on these guys like a ton of bricks, complete with the legal team and budget that one would expect of a multi million pound company.
However, if you are one of the poor saps who are forced to buy one off the Dyson website at £12.25 (including postage), it wouldn’t be unreasonable that you felt a little miffed at being stung for over a tenner for a little plastic tube.
Because the DC14 crevice tool is a pretty unique looking item, after market manufacturers have been reluctant to run the risk of taking Dyson on to produce one unless they are sure they have dotted their “i’s” and crossed their “t’s” as regards to Dyson’s intellectual copyright.
However, one company has now produced one. Just like the original, it is slightly bent and it clips to the side of your machine like your original one did.
You will be hard pressed to tell the difference between the after-market one and the original one.
Apart from the price. Dyson will charge you £12.25 for one of theirs. You can buy one of these for £8.50. Click the little “click me” icon below to go to the page where you can buy one for £8.50 including UK delivery. Continue reading
Looking for a Dyson spare parts shop local to you?
If you need Dyson spare parts, Dyson Hoover parts, Dyson vacuum cleaner parts, Dyson upright vacuum cleaner spares, Dyson Ball vacuum cleaner parts, Dyson compact vacuum cleaner parts, or in fact any part for any Dyson vac, cheaper than Dyson UK will charge you, you just found the right page!
Buying mail order or direct from the internet is the cheapest method you will find. But, you shouldn’t just choose any old website. Who are they? Will they deliver?
It is far preferable to use not only a well-regarded and trusted supplier, but one who has an actual bricks and mortar shop too. One where you can call a proper landline number (not one of those silly 0870 or 0845 numbers that might ring god knows where) and speak to a British English speaker in the UK to check stock, check part application or even to check they actually exist.
To get our top recommendation for Dyson parts in your area, please select your location from the drop down menu below and then click the button “Take me to the Dyson Shop!” Continue reading